Demolition brick tiles are one of the most popular finishing materials for loft, rustic and modern interiors. Increasingly, brick tiles are also appearing on facades, fireplaces, RTV walls, kitchens and hallways. However, even the highest quality demolition brick tiles will not guarantee a lasting effect if the wrong adhesive is used during installation.

Therefore, the question of what adhesive to choose for demolition brick tiles arises very often among both individual customers and contractors. In practice, a properly selected adhesive for brick tiles has a huge impact on the durability of the entire implementation. Moreover, it also affects the comfort of installation, safety of use and aesthetics of the completed wall.

If you are planning to install products such as Loft Red brick tiles, Classic Yellow demolition brick tiles or Old Wall demolition brick tiles, it is worth taking a moment to choose the right installation chemistry.

Why is it important to choose an adhesive for demolition brick tiles?

Many people focus primarily on choosing the color of the brick, the type of grout or how to lay the tiles. Meanwhile, it is the demolition brick tile adhesive that forms the basis of the entire installation system.

Demolition brick tiles are a natural product. Unlike many lightweight decorative claddings, they have a heavier weight, an irregular texture and a varied surface. Therefore, they require the use of a properly selected adhesive.

A poorly selected decorative brick adhesive can cause:

  • poor adhesion to the substrate,
  • Sliding of tiles during installation,
  • The formation of voids under the tiles,
  • Grout cracking,
  • The detachment of the cladding from the wall,
  • Operational problems after several years of use.

In turn, the right adhesive for brick tiles avoids these problems and ensures the durability of the implementation for many years.

Which adhesive for demolition brick tiles will be the best?

If you are wondering which adhesive for demolition brick tiles will be the best, it is worth paying attention to some of the most important parameters.

First of all, the adhesive should be characterized by:

  • high adhesion,
  • appropriate flexibility,
  • ease of application,
  • stability during installation,
  • The ability to be used on a variety of substrates,
  • Resistance to changing weather conditions.

In the case of brick tiles offered by DekoracyjnaCegla.pl, the recommended solution is FX 900 gel adhesive.

Thanks to its modern gel formula, the product provides very good working properties, while allowing for a durable installation of natural brick cladding.

Why choose FX 900 gel adhesive?

FX 900 gel adhesive was developed for demanding wall coverings. This makes it very suitable for installation of demolition brick tiles.

Product highlights:

  • high adhesion,
  • convenient application,
  • good workability,
  • stability during installation,
  • Can be used on a variety of substrates,
  • indoor and outdoor use.

Importantly, the FX 900 works well with products such as:

  • Loft Red brick tiles,
  • Classic Yellow demolition brick tiles,
  • Old Wall demolition brick tiles,
  • brick corners,
  • Brick tiles for the facade,
  • Brick tiles for the fireplace.

That is why it is very often chosen by both professional contractors and customers doing the installation themselves.

Which demolition brick wall tile adhesive to choose?

Installation of brick tiles in interiors requires the use of a product that will ensure permanent bonding of the cladding to the substrate.

In the case of walls in the living room, kitchen, hallway or bedroom, not only adhesion, but also comfort is of great importance. This makes the installation go faster and produces a better end result.

If you are wondering which adhesive for demolition brick wall tiles to choose, it is worth betting on a product designed for natural brick cladding. This is why FX 900 gel adhesive is so often used when installing brick tiles in interiors.

What kind of adhesive for demolition brick tiles for the facade should I choose?

More and more customers are choosing to use demolition brick tiles on building facades. Such a solution allows to achieve a unique visual effect and gives the building a timeless character.

However, for exterior applications, the requirements for the adhesive are much greater. Therefore, the question of what kind of adhesive for demolition brick tiles for the facade is fully justified.

The adhesive used on the facade should be resistant to:

  • precipitation,
  • variable temperatures,
  • periodic dampness,
  • The stresses resulting from the operation of the building.

In addition, it is important to remember to properly prepare the substrate, use a suitable primer and perform grouting according to the manufacturer’s recommendations.

How to prepare the wall for brick tiles?

Even the best adhesive for demolition brick tiles will not work properly if the substrate is not properly prepared.

Before installation, the wall should be:

  • bearing,
  • stable,
  • dry,
  • CLEAN,
  • dusted,
  • free of loose fragments.

In addition, it is a good idea to apply deep penetrating primer. This improves the adhesion of the adhesive and evens out the absorbency of the substrate.

In practice, proper wall preparation is one of the most important steps in the installation of brick tiles.

How to glue demolition brick tiles step by step?

Proper installation of demolition brick tiles should follow a specific sequence.

Step 1 – preparing the substrate

First, clean the wall and apply primer.

Step 2 – preparing the glue

Then prepare the FX 900 gel adhesive according to the manufacturer’s instructions.

Step 3 – applying the glue

The adhesive is spread evenly on the substrate with a suitable trowel.

Step 4 – installation of brick tiles

Demolition brick tiles are laid according to the accepted pattern and appropriate spacing.

Step 5 – grouting

Once the glue has set, you can proceed with the grout.

Step 6 – impregnation

The final step is to protect the surface using ProtectGuard impregnate.

The most common mistakes when installing brick tiles

During the installation of demolition brick tiles, mistakes are very often made, which can affect the durability of the implementation.

The most common problems are:

No priming

Failure to prime the substrate can significantly weaken the adhesion of the adhesive and increase the risk of brick tiles peeling off. Before installation, it is worth using a suitable primer that will even out the absorbency of the substrate and improve the durability of the entire cladding.

Use of random chemistry

Not every tile adhesive is suitable for installing natural brick. The choice of the right adhesive, grout, primer and waterproofing is crucial to the durability and aesthetics of the completed cladding. It is advisable to use chemistry designed for brick tiles and follow the manufacturer’s recommendations.

Grouting too fast

Allow the adhesive to set properly before grouting. Grouting too early can weaken the adhesion of the cladding and make it more difficult to properly grout.
Not sure what grout to choose? Check out our guide: “Which grout for brick – white, gray, or maybe in the color of the brick?“.

No impregnation

Lack of impregnation makes the surface more susceptible to dirt, moisture and stains. To increase the durability and ease of care of the brick, it is worth using a suitable impregnator.
Learn more in the guide: “How to protect brick in the kitchen? A practical guide to waterproofing“.

Complete installation system for demolition brick tiles

The best results are obtained by using a complete installation system.

It should include:

This ensures that all the elements work together to produce a lasting end result.

Summary

If you are wondering which adhesive for demolition brick tiles to choose, it is worth betting on proven solutions designed for natural brick cladding. The right adhesive for brick tiles affects not only the durability of the implementation, but also the comfort of installation and aesthetics of the workmanship.

For products such as Loft Red brick tiles, Classic Yellow demolition brick tiles or Old Wall demolition brick tiles, FX 900 gel adhesive is a proven solution. When combined with the right primer, grout and waterproofing, it creates a complete installation system that allows you to make a durable and striking demolition brick wall in both interiors and facades.